Epson TM-U375 - Environmental Specifications

Environmental Specifications
Temperature:
Operating: 5° to 40°C (41° to 104°F)
Storage:
- 10° to 50°C (14° to 122°F) (excluding paper and ribbon)
Humidity:
Operating: 20 to 80%RH
(see the range in Figure A.10 below, for 30°C (86°F) and above, without
condensation)
Storage: 20 to 90%RH (excluding paper and ribbon, without condensation)
temperature
Vibration resistance:
When packed:
Frequency: 5 to 55 Hz
Acceleration: 2 G
Sweep:
10 minutes (half circle)
Time:
1 hour
Directions:
X, Y, and Z
No external or internal damage should be found after the
vibration test, and the printer should operate normally.
Impact resistance:
When packed:
When unpacked:
Package:
Epson standard package
Height:
60 cm (23.62")
Directions:
1 corner, 3 edges, and 6 surfaces
No external or internal damage should be found after the
drop test, and the printer should operate normally.
Height:
5 cm (1.97")
Directions:
Lift one edge and release it (for all 4 edges)
A non-operating printer should not be damaged after it is
dropped (for all 4 edges).
Reference Information 4-7