TM-U375P
3.
Ground the other end of the ground wire.
Connecting the Power Supply
When the printer is used as a single unit, not connected to an intelligent
module, use the optional EPSON power supply,
PS-150
for your printer.
When the printer is connected to an intelligent module, the power is
supplied by the intelligent module. Refer to
the IT-U Series User’s Manual
for details. (Intelligent module connection is available for the TM-U375
only.)
Using
an
incorrect
power
supply
may
cause
fire
or
electrical
shock.
When
connecting or disconnecting the
power
supply
from the printer,
make
sure
that
the
power
supply
is
not
plugged
in
to
an
electrical outlet; otherwise
you
may
damage the
power
supply or the
printer.
1.
Make sure that the printer’s power switch is turned off, and that the
power supply’s power cord is unplugged from the electrical outlet.
1-12
Setting Up the Printer
To Next Page
Loading...
Need help?
General