Using
the
Power Switch Cover
You can use the provided power switch cover to protect the power switch
from accidental or improper operation. Attach the cover as shown in the
illustration below.
You can turn the power on or off with the switch cover attached by
inserting a pointed object (like a ball point pen) through either of the two
small holes on the switch cover.
Push to attach the cover.
If
an
accident
occurs
when
the
power
switch cover
is
attached, unplug the
power
supply
cord
from
the outlet
immediately.
Setting
Up
the Printer
1-25
To Next Page
Loading...
