Epson UB-E03 - Page 25

Chapter 2 Set up
25
2
6
Select [Manual] or [Auto].
•Manual: Inputfor[IPAddress],[SubnetMask],and[DefaultGateway].
•Auto: TheIPaddress,subnetmask,anddefaultgatewayareacquiredformDHCPserver.
7
Click the [OK] button.
8
Click the [OK] button.
• Do not use the auto setting without a DHCP server. See the manual of the server for
setting.
• Be sure that the [Set using PING] check box is checked if a setting by ping or arp
command is permitted.