Battery status is indicated on the LCD screen.
Note the following:
• The battery is not a user-replaceable part.
• Even when the product is not in use, the battery runs down. Make sure you turn off the product when
you are not using it and charge the battery on a regular basis.
• The battery runs down faster in low temperature environments.
• Charge the battery within a range of 50 to 95 °F (10 to 35 °C). The battery may not charge fully or may
deteriorate if the environment is too hot or cold.
• It takes about 2.5 hours to fully charge the battery.
• If the battery runs out quickly even after it is fully charged, it may be at the end of its service life.
Contact Epson to replace the battery.
• The battery charging light is orange during charging and turns off when the battery is fully
charged. The light flashes if the environment is too cold or too hot to charge the battery.
Charging the Battery Using the AC Adapter
Charging the Battery Using the USB Cable
Parent topic: Product Basics
Charging the Battery Using the AC Adapter
You can charge the battery using the AC adapter.
1. Connect the power cord to the AC adapter, and connect the AC adapter to the printer.
2. Plug the other end of the power cord into an electrical outlet.
Parent topic: Battery Charging
17
To Next Page
Loading...
Need help?
General
