Related tasks
Accessing the Web Config Utility
Enabling Wi-Fi Direct Mode
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or
other devices without a wireless router or access point.
1. From the home screen, select Wi-Fi Setup and press the OK button.
You see this screen:
2. Press the arrow buttons to select Wi-Fi Direct Setup and press the OK button.
3. Select Connection Setup and press the OK button.
4. Press the down arrow button, then press the OK button to change the password.
Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will
be disconnected when you change the password.
30
To Next Page
Loading...
