205
6. Insert the new cartridge into the holder and push it all the way down until it clicks into place.
7. Press the Color button to make sure the cartridges are installed correctly.
Caution: If you see a message that an ink cartridge is installed incorrectly, lift up the scanner unit,
and press the ink cartridge down until it clicks into place.
8. Close the scanner unit.
The product starts charging the ink. This takes a few minutes. When you see a completion message
on the LCD screen, ink replacement is complete.
Note: Do not turn off the product while charging or you will waste ink.
Caution: If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the printer. The valve in the ink supply port is designed to contain
any excess ink, but do not touch the ink supply port or surrounding area. Always store ink cartridges with
the label facing up; do not store cartridges upside-down.
Parent topic: Replacing Ink Cartridges
Related concepts
Purchase Epson Ink Cartridges
To Next Page
Loading...
