Epson WF-2820 Series - Paper Does Not Feed Correctly; Paper Jams

3.
Close the scanner unit.
For safety, the scanner unit is closed in two steps.
Note:
e scanner unit cannot be opened from the position shown below. Close it completely before opening it.
Paper Does Not Feed Correctly
Check the following points, and then take the appropriate actions to solve the problem.
❏ Place the printer on a at surface and operate in the recommended environmental conditions.
❏ Use paper supported by this printer.
❏ Follow the paper handling precautions.
❏ Do not load more than the maximum number of sheets specied for the paper. For plain paper, do not load
above the line indicated by the triangle symbol on the edge guide.
❏ Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
❏ Do not place objects on the feeder guard.
Related Information
& “Environmental Specications” on page 211
& “Paper Handling Precautions” on page 46
& “Available Paper and Capacities” on page 44
& “List of Paper Type” on page 50
Paper Jams
❏ Load paper in the correct direction, and slide the edge guides against the edges of the paper.
Solving Problems > Paper Does Not Feed Correctly > Paper Jams
178