Item Description
Auto Rotation Rotates faxes received as landscape-orientated, A5 size documents so that they are printed on
A5 size paper. This setting is applied when A5 size is set in Settings > Printer Setup > Paper
Source Settings > Paper Setting > Paper Size.
Selecting O, faxes received as landscape-orientated A5 size, the same width as A4 portrait
documents, are assumed and printed as A4 size faxes.
Add Reception
Information
Prints reception information in the received fax, even if the sender does not set the header
information. The reception information includes the received date and time, sender's ID, and
page number (such as "P1"). When Split Page Settings is enabled, the split page number is also
included.
2-Sided Prints multiple pages of received faxes on both sides of the paper.
Print Start Timing Select options to start printing the faxes to receive.
❏ All Pages Received: Printing starts after receiving all of the pages. To start printing from the
rst page or last page depends on the setting of Collation Stack feature. See the
explanation for Collation Stack.
❏ First Page Received: Starts printing when the rst page is received, and then prints in order
as the pages are received. If the printer cannot start printing, such as when it is printing other
jobs, the printer starts printing received pages as a batch when it is available.
Collation Stack Since the rst page is printed last (output to the top), the printed documents are stacked in the
correct page order. When the printer is running low on memory, this feature may not be
available.
Print Suspend Time During the time period you specied from Stop through Restart you specied, the printer saves
documents received in the printer's memory without printing them. This feature can be used for
noise prevention at night or to prevent
condential
documents from being disclosed while you
are away. Before using this feature, make sure there is enough free memory. When you set this
to O, you can print the received documents even before the restart time.
Quiet Mode Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.
Report Settings Menu
You can nd the menu on the printer's control panel below:
Settings > Fax Settings > Report Settings
Item Description
Fax Log Auto Print Prints the fax log automatically. Select On(Every 30) to print a log every time 30 fax jobs are
completed. Select On(Time) to print the log at a specied time. However, if the number of fax
jobs exceeds 30, the log is printed before the specied time.
Attach Fax image to
report
Prints a Transmission Report with an image of the rst page of the sent document. Select
On(Large Image) to print the upper part of the page without reducing. Select On(Small
Image) to print the entire page reducing it to
t
onto the report.
Report Format Selects a format for fax reports in Fax > Menu > More > Fax Report other than Protocol Trace.
Select Detail to print with error codes.
Fax Settings
>
Menu Options for Fax Settings
>
Report Settings Menu
76
To Next Page
Loading...
Need help?
General
