Epson WF-2820 Series User Manual

❏ Pre-punched paper
Note:
❏ Load a single sheet of dened size plain paper with binding holes at the le or right.
❏ Adjust the print position of your le to avoid printing over the holes.
❏ Automatic 2-sided printing is not available for pre-punched paper.
4.
Slide the edge guides to the edges of the paper, and then close the feeder guard.
c
Important:
Do not place objects on the feeder guard. Doing so may prevent paper from feeding.
5.
On the control panel, set the size and type of the paper you loaded in the rear paper feed.
To select an item, use the
u d l r buttons, and then press the OK button.
Note:
❏ You can also display the paper size and paper type settings screen by selecting Settings > Printer Setup > Paper
Source Settings > Paper Setting.
❏ For letterhead paper, select Letterhead as the paper type.
❏ For letterhead paper, if you print on paper that is smaller than the setting in the printer driver, the printer may print
beyond the edges of the paper which can lead to ink smears on your printouts and excess ink building up inside the
printer. Make sure you select the correct paper size setting.
❏ 2-sided printing and borderless printing are not available for letterhead paper. Also, the print speed may be slower.
Preparing the Printer > Loading Papers > Loading Paper in the Rear Paper Feed
48

Epson WF-2820 Series Specifications

General

Print Technology	Inkjet
Max Print Size	8.5" x 47.2"
Functions	Print, Copy, Scan, Fax
Scanner Type	Flatbed color image scanner
Fax Speed	33.6 Kbps
Display	1.44" color LCD
Automatic Document Feeder	Yes, 30 sheets
Duplex Printing	Manual
Print Resolution	5760 x 1440 optimized dpi
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Scan Resolution	1200 dpi
Paper Sizes Supported	A4, A5, A6, B5, Letter, Legal
Input Capacity	100 sheets
Connectivity	USB, Wi-Fi
Mobile Printing	Apple AirPrint, Google Cloud Print
Ink Cartridges	Black, Cyan, Magenta, Yellow