Epson WF-C878R Series User Manual

Scan Area:
Select the scan area. To scan at the maximum area of the scanner glass, select Max Area.
❏ Orientation (Original):
Select the orientation of the original.
Original Type:
Select the type of your original.
Advanced Menu Options for Scanning to a Memory Device
Note:
e items may not be available depending on other settings you made.
Orientation (Original):
Select the orientation of the original.
Mixed Size Originals:
You can place the following combination of sizes in the ADF at the same time. A3 and A4; B4 and B5.
When using these combinations, originals are scanned at the actual size of the originals. Place your
originals by aligning the width of the originals as shown below.
Density:
Select the contrast of the scanned image.
Remove Shadow:
Remove the shadows of the original that appear in the scanned image.
❏ Frame:
Remove the shadows at the edge of the original.
❏ Center:
Remove the shadows of the binding margin of the booklet.
Remove Punch Holes:
Remove the punch holes that appear in the scanned image. You can specify the area to erase the
punch holes by entering a value in the box on the right.
❏ Erasing Position:
Select the position to remove the punch holes.
❏ Orientation (Original):
Select the orientation of the original.
Scanning > Scanning Originals to a Memory Device > Advanced Menu Options for Scanning to a Memory Device
117

Epson WF-C878R Series Specifications

General

Print Technology	PrecisionCore Heat-Free Technology
Max Print Resolution	4800 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Max Scan Resolution	1200 x 2400 dpi
Fax	Yes
Print Speed (Black)	25 ppm (ISO)
Print Speed (Color)	24 ISO ppm
Scanner Type	Flatbed, ADF
Paper Formats	A4, A5, A6, B5, Letter, Legal
Display	4.3" color touchscreen
Mobile Printing	Apple AirPrint, Mopria Print Service
Ink Type	DURABrite Ultra pigment ink
Ink Cartridges	Black, Cyan, Magenta, Yellow