Find and enter the number for the least separated and overlapping pattern.
Note:
When you print the paper that can be adjusted the quality, select Auto Select (plain papers) on Paper Type for printer
driver, so adjustment value is automatically applied.
7.
Close the information screen.
If the print quality is not improved aer performing this adjustment, performPrint Quality Adjustment to set
the standard adjustment values, and then perform adjustments again according to the paper type.
Saving Power
e printer enters sleep mode or turns o automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will
aect
the product's energy
eciency.
Please
consider the environment before making any change.
Depending on the location of purchase, the printer may have a feature that turns it
o
automatically if it is not
connected to the network for 30 minutes.
Saving Power (Control Panel)
1.
Select Settings on the home screen.
2.
Select General Settings > Basic Settings.
3.
Do one of the following.
Note:
Your product may have the Power O Settings or Power O Timer feature depending on the location of purchase.
❏ Select Sleep Timer or Power O Settings > Power O If Inactive or Power O If Disconnected, and then
make settings.
❏ Select Sleep Timer or Power O Timer, and then make settings.
Maintaining the Printer
>
Saving Power
>
Saving Power (Control Panel)
176
To Next Page
Loading...
Need help?
General
