Font size 60 pt to 96 pt. Recommended sizes are 60 pt and 75 pt (standard).
e following codes are inserted automatically and need not be input by hand:
❏ Le/Right margin
❏
Le/Right
guard bar
❏ Check digit
❏ OCR-B
❏ e numeral “0”
Print sample
EPSON UPC-E
EPSON Code39
❏ Four Code39 fonts are available, allowing you to enable and disable the automatic insertion of check digits and
OCR-B.
❏ e height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the
Code39 standard. For this reason, it is important to keep at least one space between the bar code and the
surrounding text to prevent overlapping.
❏ Spaces in Code39 bar codes should be input as “_” underbars.
❏ When printing two or more bar codes on one line, separate the bar codes with a tab, or select a font other than a
BarCode Font and input the space. If a space is input while a Code39 font is selected, the bar code will not be
correct.
Character type Alphanumeric characters (A to Z, 0 to 9) Symbols (- . space $ / + %)
Number of characters No limit
Font size When OCR-B is not used: 26 pt to 96 pt. Recommended sizes are 26 pt, 52 pt and 78 pt.
When OCR-B is used: 36 pt to 96 pt. Recommended sizes are 36 pt and 72 pt.
e following codes are inserted automatically and need not be input by hand:
❏ Le/Right quiet zone
❏ Check digit
❏ Start/Stop character
Print sample
EPSON Code39 EPSON Code39 CD
Product Information
>
Font Specications
>
Epson BarCode Fonts (Windows Only)
403
To Next Page
Loading...
Need help?
General
