Epson WF-C878R Series User Manual

❏ Local Port
If you select Port Number for Method of Choosing Port and if you select TCP or UDP for Transport
Protocol, enter port numbers to control receiving packets, separating them with commas. You can enter 10 port
numbers at the maximum.
Example: 20,80,119,5220
If you do not enter a port number, all ports are controlled.
❏ Remote Port
If you select Port Number for Method of Choosing Port and if you select TCP or UDP for Transport
Protocol, enter port numbers to control sending packets, separating them with commas. You can enter 10 port
numbers at the maximum.
Example: 25,80,143,5220
If you do not enter a port number, all ports are controlled.
IKE Version
Select IKEv1 or IKEv2 for IKE Version. Select one of them according to the device that the printer is connected to.
❏ IKEv1
e following items are displayed when you select IKEv1 for IKE Version.
Items Settings and Explanation
Authentication Method
If you select IPsec for Access Control, select an option. Used certicate is common with a
default policy.
Pre-Shared Key
If you select Pre-Shared Key for Authentication Method, enter a pre-shared key
between 1 and 127 characters.
Conrm Pre-Shared Key Enter the key you congured for conrmation.
Administrator Information > Advanced Security Settings > Encrypted Communication Using IPsec/IP Filtering
511

Epson WF-C878R Series Specifications

General

Print Technology	PrecisionCore Heat-Free Technology
Max Print Resolution	4800 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Max Scan Resolution	1200 x 2400 dpi
Fax	Yes
Print Speed (Black)	25 ppm (ISO)
Print Speed (Color)	24 ISO ppm
Scanner Type	Flatbed, ADF
Paper Formats	A4, A5, A6, B5, Letter, Legal
Display	4.3" color touchscreen
Mobile Printing	Apple AirPrint, Mopria Print Service
Ink Type	DURABrite Ultra pigment ink
Ink Cartridges	Black, Cyan, Magenta, Yellow