Epson WF-M5899 - Scanning to a Connected Computer

163
3. Select Scan.
4. Select Email.
5. Do one of the following:
• Select an email address from any of the displayed frequent contacts.
• Select Keyboard to use the on-screen keyboard to enter the email address for the recipient(s)
and select OK.
• Select Contacts and choose an email address from the list.
• Select History to choose an email address from your recent scan history.
6. Select Scan Settings.
7. Select File Format to choose the file format for your scan.
8. Scroll down to change the Subject and File Name, if necessary.
9. Select any additional scan settings as necessary.
10. Select Presets to save your scan settings.
Note: Presets can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
11. Select Send.
Your product scans your original and emails the scanned file.
Parent topic: Starting a Scan Using the Product Control Panel
Related tasks
Configuring an Email Server
Registering Contacts for Email, Network, or FTP Scanning - Control Panel
Related topics
Placing Originals on the Product
Scanning to a Connected Computer
You can scan an original and save it to a connected computer using your product's control panel. The
computer must be on the same network as the product and must have the Document Capture Pro
Server software installed. The product must also be configured for Document Capture Pro Server.