99
Placing Originals on the Product
Follow the instructions here to place your original documents or photos on the product.
Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid
damaging it.
Placing Originals in the Automatic Document Feeder
Placing Originals on the Scanner Glass
Placing Originals in the Automatic Document Feeder
You can place single- or multi-page original documents in the Automatic Document Feeder (ADF). You
can also use the ADF to scan both sides of a 2-sided document. Make sure the originals meet the
Automatic Document Feeder specifications before loading them.
Caution: Do not load the following types of originals in the ADF, or they may be damaged or may
damage the scanner. Use the scanner glass for these types:
• Ripped, curled, folded, deteriorated, or wrinkled originals
• Originals with holes
• Originals containing staples or paper clips
• Originals with carbon paper backing
• Originals with labels, stickers, or sticky notes
• Originals that are bound
• Originals that are cut irregularly or not cut at a right angle
• Photos or valuable artwork
• Thermal paper
• Transparencies
• Fabric or other non-paper originals
• Originals with uneven surfaces, such as embossed documents
• Originals with wet ink
To Next Page