Epson WF-M5899 - Using Your Product on a Secure Network; Configuring Protocols and Services in Web Config; Protocol Settings

308
Parent topic: Configuring Security Settings
Using Your Product on a Secure Network
Follow the instructions in these sections to configure security features for your product on the network
using the Web Config software.
Configuring Protocols and Services in Web Config
Configuring SSL/TLS Communication
Configuring IPsec/IP Filtering
Connecting the Product to an IEEE 802.1X Network
Using a Digital Certificate
Parent topic: Administering Your Product
Configuring Protocols and Services in Web Config
You can enable or disable protocols using Web Config.
1. Access Web Config, select Network Security, and select Protocol.
2. Select or deselect the checkbox next to the service name to enable or disable a protocol.
3. Configure any other available protocol settings.
4. Click Next.
5. Click OK.
6. Select and configure services and protocol settings as necessary.
After the protocols restart, the changes are applied.
Protocol Settings
Parent topic: Using Your Product on a Secure Network
Protocol Settings
Protocols
Name Description
Bonjour Bonjour is used to search for devices and AirPrint
iBeacon Enable the iBeacon setting to search for the product from
iBeacon-enabled devices