173
Note: If you need to edit or delete scanning contacts, the procedures are the same as for fax contacts.
Parent topic: Setting Up and Scanning to a Network Folder or FTP Server
Scanning to a Network Folder or FTP Server
You can scan an image and save it to a network folder using your product's control panel. You can either
enter the folder path directly on the product's control panel or select a folder from the Destination tab.
Note: Make sure the date and time are set correctly before using this feature.
1. Place your original on the product for scanning.
Note: To scan a double-sided or multi-page document, place your originals in the ADF.
2. Press the home button, if necessary.
3. Select Scan.
4. Select Network Folder/FTP.
You see a screen like this:
5. Do one of the following:
• Choose a saved location on the Destination tab.
To Next Page
Loading...
