265
Adjusting Print Quality
If your print quality declines, you may need to run a utility to clean or align the print head.
Note: If you are using your Epson product with the Windows 10 S operating system, you cannot use the
software described in this section. You also cannot download and install any Epson product software
from the Epson website for use with Windows 10 S; you must obtain software only from the Windows
Store.
Note: When using the PCL or PostScript (PS3) printer software with the product, you can clean and
align the print head and run a nozzle check by using the printer buttons or the utilities included with the
standard Epson printer software. To download the standard Epson printer software, visit
epson.com/support (U.S.), epson.ca/support (Canada), or latin.epson.com/support (Latin America) and
select your product.
If running these utilities does not solve the problem, you may need to replace the ink pack.
Print Head Maintenance
Cleaning the Paper Guide
Cleaning the Translucent Film
Checking the Number of Sheets on the LCD Screen
Print Head Maintenance
If your printouts become too light, or you see dark or light bands across them, you may need to clean the
print head nozzles. Cleaning uses ink, so clean the nozzles only if print quality declines.
You can check for clogged nozzles before you clean them so you don’t clean them unnecessarily.
Note: You cannot clean the print head if ink is expended, and may not be able to clean it when ink is low.
Print Head Nozzle Check
Print Head Cleaning
Print Head Alignment
Parent topic: Adjusting Print Quality
Print Head Nozzle Check
You can print a nozzle check pattern to check for clogged nozzles.
To Next Page
Loading...
Need help?
General