372
• Adjust the print quality in the product software.
• Clean the paper path.
• Clean the paper rollers.
• Do not press too hard on the original or the document cover when you are scanning originals on the
scanner glass.
• Clean the scanner glass.
• If you are copying from the ADF, place your originals on the scanner glass instead.
• Clean the ADF.
• Clean the originals.
Note: Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that
extends beyond the base of the product in all directions.
Parent topic: Solving Print Quality Problems
Related references
Paper Specifications
Compatible Epson Papers
Paper or Media Type Settings - Printing Software
Related tasks
Loading Paper in the Paper Cassettes and Rear Paper Tray
Selecting the Paper Settings for Each Source - Control Panel
Cleaning the Scanner Glass
Cleaning the Automatic Document Feeder
Cleaning the Paper Guide
Faint Printout or Printout Has Gaps
If your printouts are faint or have gaps, try these solutions:
• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if
necessary.
• The ink pack may be old or low on ink, and you may need to replace it.
• Make sure the paper type setting matches the type of paper you loaded.
• Make sure your paper is not damp, curled, old, or loaded incorrectly in your product.
To Next Page
Loading...
