Epson WF-M5899 - Updating a Self-Signed Certificate; Importing a CA Certificate

330
2. Select one of the following network security options and corresponding certificate:
• SSL/TLS and select Certificate
• IPsec/IP Filtering and select Client Certificate
• IEEE802.1X and select Client Certificate
3. Click Delete.
You see a completion message.
4. Click OK.
Parent topic: Using a Digital Certificate
Updating a Self-signed Certificate
If your product supports the HTTPS server feature, you can update a self-signed certificate using Web
Config.
1. Access Web Config and select Network Security, select SSL/TLS, and select Certificate.
2. Click Update.
3. Enter an identifier for your product from 1 to 128 characters long in the Common Name field.
Note: You can add up to 5 IPv4 addresses, IPv6 addresses, host names, or FQDNs; separated by
commas. The first value is assigned to the Common Name field, and the rest are added to the Alias
field of the certificate subject. You cannot enter a space before or after a comma.
4. Select a validity period for the certificate as the Certificate Validity (year) setting.
5. Click Next.
You see a completion message.
6. Click OK.
7. Click Confirm to verify the certificate information.
Parent topic: Using a Digital Certificate
Importing a CA Certificate
You can import a CA certificate using Web Config.
1. Access Web Config and select Network Security.
2. Select CA Certificate.
3. Select Import.