Epson WF-M5899 - Page 309

309
Name Description
SLP SLP is used for push-scanning and network searching in
EpsonNet Config
WSD Add WSD devices, or print and scan from the WSD port
LLTD Displays the product on the Windows network map
LLMNR Use name resolution without NetBIOS even if you cannot use
DNS
LPR Print from to the LPR port
RAW(Port9100) Print from the RAW port (Port 9100)
IPP Print over the Internet, including AirPrint
FTP Print over FTP
SNMPv1/v2c Remotely set up and monitor your product
SNMPv3 Remotely set up and monitor your product with the SNMPv3
protocol
Bonjour Settings
Setting Options/Description
Use Bonjour Search for or use devices through Bonjour
Bonjour Name Displays the Bonjour name
Bonjour Service Name Displays the Bonjour service name
Location Displays the Bonjour location name
Top Priority Protocol Selects the protocol that is the top priority for Bonjour printing
Wide-Area Bonjour Enables the Wide-Area Bonjour protocol; register all products
on the DNS server to locate them over the segment
iBeacon Settings
Setting Options/Description
Enable iBeacon Transmission Enable the iBeacon transmission function