Epson WF-M5899 - Page 312

312
Setting Options/Description
URL(Network) Displays IPP URLs (http and https) when the product is
connected using wired LAN or Wi-Fi (the URL is a combined
value of the product’s IP address, Port number, and IPP
printer name)
URL(Wi-Fi Direct) Displays IPP URLs (http and https) when the product is
connected using Wi-Fi Direct (the URL is a combined value of
the product’s IP address, Port number, and IPP printer name)
Printer Name Displays the IPP printer name
Location Displays the IPP location
FTP Settings
Setting Options/Description
Enable FTP Server Enable FTP printing for products that support FTP printing
Communication Timeout (sec) Enter the timeout value for FTP communication between 0
and 3,600 seconds
SNMPv1/v2c Settings
Setting Options/Description
Enable SNMPv1/v2c Enable SNMPv1/v2c for products that support SNMPv3
Access Authority Set the access authority when SNMPv1/v2c is enabled to
Read Only or Read/Write
Community Name (Read Only) Enter 0 to 32 ASCII characters
Community Name (Read/Write) Enter 0 to 32 ASCII characters
Allow access from Epson tools Allow information to be written from Epson tools such as
Epson Device Admin
SNMPv3 Settings
Setting Options/Description
Enable SNMPv3 Enable SNMPv3 for products that support SNMPv3