3.
On the Main Settings tab, select On in Automatic Feeding Mode.
Note:
You can specify timeout settings to exit Automatic Feeding Mode.
Select Settings in the Document Source list to open the Document Source Settings window. Set Automatic Feeding
Mode Timeout (minutes) on the displayed window.
4.
Specify other settings for scanning in the Epson Scan 2 main window.
5.
en click Scan.
Automatic Feeding Mode starts.
e
Automatic Feeding Mode window is displayed on your computer and the scanner.
Scanning
>
Scanning with Manual Feed in Automatic Feeding Mode
106
To Next Page
Loading...
