Epson WorkForce DS-32000 User Manual

Position of Scanner Position of Feed Se-
lector
Scanning Methods
Basic Scanning
*
Scanning in Auto-
matic Feeding
Mode.
Scanning in Auto-
matic Feeding
Mode(Continuous)
Normal Feed Position
Delicate Feed
---
Normal Feed
✓
(default setting)
✓ -
Manual Feed
✓
(default setting)
✓ -
Delicate Feed Posi-
tion
Delicate Feed
✓
(default setting)
✓ -
Normal Feed
---
Manual Feed
✓✓✓
(default setting)
* Scanning without Automatic Feeding Mode
!
Caution:
e supported combinations vary depending on the types of originals.
For more details, refer to the related information.
Related Information
& “
Specications
and Capacity for Originals being Scanned” on page 30
is section explains the specications and capacity for originals
Changing the Position of the Scanner
Follow the steps below to change the position of the scanner.
!
Caution:
❏ Do not move the position selector during scanning. Otherwise, an error occurs and scanning stops.
❏ Be careful not to pinch your ngers or any cables when you change the position of the scanner. Injury or damage
may occur.
Scanner Basics > Position of Scanner > Changing the Position of the Scanner
19

Epson WorkForce DS-32000 Specifications

General

Brand	Epson
Model	WorkForce DS-32000
Category	Scanner
Language	English