Epson WorkForce DS-32000 - Scanner Settings

Number of Scans After Regular Cleaning
Displays the number of scans
aer
performing regular cleaning.
Reset the number of scans aer performing regular cleaning.
Scanner Settings
Power Separation Mode
Increases the force used to separate multiple originals in the Delicate Feed Position while
(Delicate Feed) is selected.
Enable this to scan originals that are
uy
or stuck together.
Do not use Power Separation Mode for thin originals.
e
originals may be damaged.
Slow
Slows down the feeding speed whenever scanning. Switching On and
O
also switches the icon
displayed at the top of the screen.
Enable this in the following situations:
❏ When originals are jammed frequently
❏ When loading thin originals
❏ When scanning dierent types or sizes of originals at once
❏ If you feel that the scanner is noisy
Double Feed Stop Timing
Set the timing to stop operations when any double feed of originals is detected.
❏ Immediate: Stops immediately aer any double feed is detected.
❏
Aer
Eject: Stops
aer
the originals being scanned are ejected.
DFDS Function
Skips double feed detection only once and continues scanning. Switching on and
o
also switches the
icon displayed at the top of the screen.
Enable this to scan originals that are detected as double feeds, such as plastic cards and envelopes.
Paper Protection
Reduces damage to the originals by stopping scanning immediately when the following status is
detected.
❏ A feeding error for the originals occurs
❏ Originals are fed askew
Select the detection level to enable this feature. See the table below for details on each level.
Level Examples of Protectable Paper Detection Sensitivity for Feeding
Skew
On-Low Plain paper Low
On-Medium Plain paper, Thin paper
Menu Options on the Control Panel > Settings > Scanner Settings
113