Epson WorkForce DS-32000 - Placing Thin Paper

5.
Adjust the edge guides to
t
the originals without any gap. Otherwise, the originals may be fed skewed.
Placing Thin Paper
is section describes how to load multiple pieces of thin paper at a time.
in paper refers to delicate originals such as extremely thin paper.
Note:
❏ To scan one by one with manual insertion, we recommend that you use Automatic Feeding Mode(Continuous).
❏ To scan thin paper, make the necessary settings in Epson Scan 2.
Open Epson Scan 2. On the Main Settings tab, select White as the Background Color.
When Auto Detect or Passport is selected as the Document Size, and Paper Skew is selected as the Correct Document
Skew you cannot select White as the Background Color.
is section explains how to place the originals when the paper feeding mode is in Delicate Feed as an example.
1.
Set the scanner in the Delicate Feed Position.
2.
Set the feed selector to
(Delicate Feed).
3.
Extend the input tray extension. Pull out the output tray extension to the length of the original. Raise the
stopper if necessary.
Placing Originals > Placing Thin Paper
56