4.
Load the booklet into the input tray with the printed surface facing down, and the thicker side pointing down,
as shown in the diagram.
Insert the booklet into the ADF until it meets resistance.
5.
Align the edge guides with the booklet.
Note:
To scan a booklet, specify the necessary settings in the Epson Scan 2 window.
Open the Epson Scan 2 window. In the Main Settings tab, select O for Detect Double Feed. See the Epson Scan 2 help
for details.
Select Booklet from Scan Settings in Epson Scan 2.
See Document Capture Pro help on how to specify the settings of Epson Scan 2 from Document Capture Pro.
Placing Originals
>
Placing a Booklet
72
To Next Page
Loading...
Need help?
General