5.
To change the scan settings, tap Scanner Settings.
❏ If you set Disable job setting changes on control panel, you cannot change the settings.
❏ To scan originals that are detected as double feeds, such as plastic cards and envelopes, enable DFDS
Function to skip double feed detection.
❏ To scan originals that are likely to jam, such as thin paper, enable Slow to reduce the feeding speed.
6.
Press the
x
button to start scanning.
Related Information
& “Placing Originals” on page 45
Scanning
>
Scanning Using the Control Panel
94
To Next Page
Loading...
