189
1. Place your original on the product for faxing.
Note: You can send up to 100 pages in one fax transmission, depending on the remaining amount of
memory.
2. Press the home button, if necessary.
3. Select Fax.
You see a screen like this:
4. Do one of the following to select fax recipients:
• Manually enter a fax number: Select Keypad, enter a fax number using the displayed keypad,
and press OK when done. To add another fax number, repeat this step; the number of multiple
recipients appears in the upper right corner of the LCD screen.
Note: If direct dialing has been restricted, you can only select the number from the contact list or
fax history. If necessary, enter an outside line access code (such as 9) at the beginning of the fax
number. If the access code has been set up in the Line Type setting, enter the # pound sign
instead of the code. If your fax number requires a brief pause, select – to insert a pause symbol
(–).
• Select from the contact list: Select Contacts to display the contact list. Select one or more
contacts (select the contact again to deselect it), and select Close.
To Next Page
Loading...
Need help?
General
