279
Paper Ejection Problems
If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.
Select the correct paper size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting when you reprint.
• If you are using letterhead paper, select the appropriate paper type setting.
Parent topic: Solving Paper Problems
Related references
Paper Jams Inside the Product
Paper or Media Type Settings - Control Panel
Paper or Media Type Settings - Printing Software
Paper Specifications
Related tasks
Cancelling Printing From the LCD Screen
Related topics
Loading Paper
Solving Problems Printing from a Computer
Check these sections if you have problems while printing from your computer.
Note: When printing using AirPrint, the available print settings are different from those covered in this
manual. See the Apple website for details.
Nothing Prints
Product Icon Does Not Appear in Windows Taskbar
Printing is Slow
Parent topic: Solving Problems
Nothing Prints
If you have sent a print job and nothing prints, try these solutions:
• Make sure your product is turned on and connected to your computer.
To Next Page
Loading...
Need help?
General
