61
Note: Do not select automatic 2-sided printing for this type of paper and do not print over the
holes.
5. Slide the edge guides against the paper, but not too tightly.
Note: Make sure the paper fits under the tabs on the edge guides.
6. Slide the cassette back into the product until it stops and close the front cover.
7. Select the size and type of the paper you loaded on the product LCD screen and select OK.
Note: If you are printing on letterhead, make sure you select Letterhead as the paper type. Make
sure you select the correct paper size setting.
8. Extend the output tray.
To Next Page
Loading...
Need help?
General
