EasyManua.ls Logo

Epson WorkForce WF-2660 - Removing and Installing Ink Cartridges

Epson WorkForce WF-2660
305 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ink color Part number
Standard-capacity High-capacity
Cyan 220 220XL
Magenta 220 220XL
Yellow 220 220XL
Parent topic: Purchase Epson Ink Cartridges
Removing and Installing Ink Cartridges
Make sure you have your replacement cartridges handy before you begin. You must install new
cartridges immediately after removing the old ones.
Caution: Leave your old cartridges in the printer until you are ready to replace them to prevent the print
head nozzles from drying out. Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
1. Turn on your product.
If an ink cartridge is expended, you see a message on the LCD screen. Note which cartridges
need to be replaced, then select Proceed and follow the instructions on the screen.
If you are replacing a cartridge before you see a message on the LCD screen, press the home
button and select Setup > Maintenance > Ink Cartridge Replacement and press the
Color button.
210

Table of Contents

Related product manuals