Epson WorkForce WF-2660 User Manual

• If there are gaps or the pattern is faint, click Clean to clean the print head again.
If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours. Then
try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or
damaged and needs to be replaced.
Parent topic: Print Head Cleaning
Related tasks
Cleaning the Print Head Using the Product Control Panel
Checking the Nozzles Using the Product Control Panel
Removing and Installing Ink Cartridges
Print Head Alignment
If your printouts become grainy or blurry, you notice misalignment of vertical lines, or you see dark or
light horizontal bands, you may need to align the print head.
Note: Banding may also occur if your print head nozzles need cleaning.
Aligning the Print Head Using the Product Control Panel
Aligning the Print Head Using a Computer Utility
Parent topic: Adjusting Print Quality
Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
1. Load a few sheets of plain paper in the cassette.
2. Press the home button, if necessary.
3. Select Setup.
4. Select Maintenance.
227

Epson WorkForce WF-2660 Specifications

General

Print Technology	Inkjet
Print Resolution	5760 x 1440 dpi
Functions	Print, Copy, Scan, Fax
Fax Speed	33.6 Kbps
Input Capacity	150 sheets
Connectivity	USB, Ethernet, Wi-Fi
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Max Print Size	8.5 x 47.2 inches
Print Speed (Black)	13 ppm (ISO)
Print Speed (Color)	7.3 ISO ppm
Scanner Type	Flatbed
Copy Speed (Black)	11 ppm (ISO)
Copy Speed (Color)	5.5 ISO cpm
Copy Resolution	600 x 600 dpi
Fax Resolution	200 x 200 dpi
Weight	14.6 lbs
Display	2.7-inch color touchscreen
Ink Cartridge	220 Black, 220 Cyan, 220 Magenta, 220 Yellow