Menu Setting Item Description
Communication
DRD: Indicates the type of answer ring pattern you
want to use to receive faxes. To select an option other
than All (or Off), you must set up your phone system
to use different ring patterns. This option may be On
or Off depending on the region.
ECM: Indicates whether or not to use Error Correction
Mode to automatically correct fax data sent/received
with errors due to the line or any other problems.
Color faxes cannot be sent/received when ECM is off.
Fax Speed: Indicates the speed at which you transmit
and receive faxes.
Rings to Answer: Indicates the number of rings that
must occur before the product automatically receives
a fax. Depending on the region, this setting may not
be displayed.
Dial Tone Detection: When this is set to On, the
product starts dialing after it detects a dial tone. It may
not be able to detect a dial tone when a PBX (Private
Branch Exchange) or a TA (Terminal Adapter) is
connected. In that case, set to Off. However, doing so
may drop the first digit of a fax number and send the
fax to the wrong number.
Dial Mode: Indicates the type of phone system to
which you have connected the product. Depending
on the region, this setting may not be displayed.
Header: & See “Creating header information” on
page 85
Security Settings
Backup Data Auto Erase: Select On if you do not
want to store sent or printed faxes in the product’s
memory. Select Off to store sent or printed faxes until
the memory is full.
Erase Backup Data: Erases sent or printed fax data
from the product’s memory.
Check Fax Connection Checks the status of your fax connection.
External Device Setup Print Settings For details on the setting items, refer to the Print
Photos menu list in the More Functions mode.
Photo Adjustments
Print Status Sheet - -
Restore Default Settings Fax Send/Receive Settings Initializes Fax Send/Receive settings to the factory
default settings.
Fax Data Settings Initializes Fax Data settings to the factory default
settings.
Wi-Fi/Network Settings Initializes Wi-Fi/Network settings to the factory
default settings.
All except Wi-Fi/Network & Fax Settings Initializes all settings except for Wi-Fi/Network & Fax
settings to the factory default settings.
All Settings Initializes all settings to the factory default settings.
User’s Guide
Menu List of Control Panel
103
To Next Page
Loading...
