Epson WorkForce WF-3520DWF - Sending Faxes Using Speed Dial;Group Dial; Sending Faxes by Broadcasting

B
Enter Fax mode from the Home menu.
C
Use the keys on the numeric keypad to enter the fax number. You can enter up to 64 digits.
Note:
❏ To display the last fax number you used, press
or Redial.
❏ Press d and make the send settings. To scan and fax both sides of your original, select 2-Sided Faxing, On, and
then load the original in the Automatic Document Feeder. Depending on the model, you can also make the
settings by selecting Send Settings.
❏ Make sure you have entered the header information. Some fax machines automatically reject incoming faxes
that do not include header information.
D
Press x (color) or x (B&W) to start sending a color or monochrome fax.
Note:
If the fax number is busy or there is some problem, this product redials after one minute. Press Redial to redial immediately.
Sending faxes using speed dial/group dial
Follow the instructions below to send faxes using speed dial/group dial. When using group dial, you can only send
B&W faxes.
A
Place your original in the Automatic Document Feeder or on the scanner glass.
& “Placing Originals” on page 32
B
Enter Fax mode from the Home menu.
C
Press or select Contacts.
D
Select the entry number to send.
Note:
Press d and make the send settings. Depending on the model, you can also make the settings by selecting Send
Settings.
E
Press x (color) or x (B&W) to start sending a color or monochrome fax.
Sending faxes by broadcasting
Broadcast allows you to easily send the same fax to multiple numbers (up to 100) using speed dial/group dial, or by
entering the fax numbers. Follow the instructions below to send faxes by broadcasting.
User’s Guide
Faxing
87