Notices when the power is turned off
When the power is left off for an extended period of time, the clock may be reset. Check the clock when you turn the
power back on.
If the product is turned off due to a power failure, it automatically restarts and beeps when the power is restored. If you
have set to receive faxes automatically (Auto Answer - On), the setting is also restored. Depending on the
circumstances before the power failure, it may not restart.
Setting Up Fax Features
Setting up speed dial entries
You can create a speed dial list allowing you to select fax recipient numbers quickly when faxing. Up to 100 combined
speed dial and group dial entries can be registered.
A
Enter Fax mode from the Home menu.
B
Press or select Contacts.
C
Select Edit Contacts.
D
Select Speed Dial Setup. You see the available speed dial entry numbers.
E
Select the speed dial entry number that you want to register. You can register up to 100 entries.
F
Use the numeric keypad to enter a phone number. You can enter up to 64 digits.
Note:
A hyphen ("-") causes a slight pause when dialing. Only include it in phone numbers when a pause is necessary. Spaces
entered between numbers are ignored when dialing.
G
Enter a name to identify the speed dial entry. You can enter up to 30 characters.
H
Select Done to register the name.
Setting up group dial entries
You can add speed dial entries to a group, allowing you to send a fax to multiple recipients at the same time. Up to 99
combined speed dial and group dial entries can be entered.
A
Enter Fax mode from the Home menu.
User’s Guide
Faxing
84
To Next Page
Loading...
