❏ Open the ADF cover and use a soft, dry, clean cloth to clean the roller and the interior of the ADF.
❏ Do not press the surface of the scanner glass with any force.
❏ Be careful not to scratch or damage the surface of the scanner glass, and do not use a hard or abrasive brush to clean
it. A damaged glass surface can decrease the scan quality.
Cleaning the interior of the product
To keep your print results at their best, clean the roller inside by using the following procedure.
!
Caution:
Be careful not to touch the parts inside the product.
c
Important:
❏ Be careful to keep water away from the electronic components.
❏ Do not spray the inside of the product with lubricants.
❏ Unsuitable oils can damage the mechanism. Contact your dealer or a qualified service person if lubrication is
needed.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Load several sheets of A4-size plain paper in the paper cassette.
Note:
If the product is equipped with two cassettes, load paper in cassette 1.
C
Enter Copy mode from the Home menu.
D
Press one of the x buttons to make a copy without placing a document on the scanner glass.
E
Repeat step 4 until the paper is not smeared with ink.
User’s Guide
Maintaining Your Product and Software
125
To Next Page
Loading...
