Receive a fax by polling
This allows you to receive a fax from the fax information service you have called.
Note:
❏ Depending on the Fax Output settings, the received fax is saved as a data or printed.
& “Changing Fax Output setting to print” on page 86
❏ If Fax Output is set to Save, the received fax data is automatically saved as data, and you can skip step 1.
Follow the instructions below to receive a fax by polling.
A
Load plain paper in the cassette.
& “Loading Paper into the Paper Cassette” on page 24
Note:
If your product is equipped with two cassettes, load paper in cassette 1. If you have changed the Paper Source setting
(Setup > Fax Settings > Receive Settings > Paper Source), load paper in the cassette you specified.
B
Enter Fax mode from the Home menu.
C
If Advanced Options is displayed on the LCD screen, select Advanced Options.
If it is not displayed, press d.
D
Select Polling.
E
Select On.
F
Enter the fax number.
G
Press one of the x buttons to receive the fax.
Note:
❏ If Fax Output is set to Save, the received fax data is automatically saved as data, and you do not have to proceed
to step 8.
❏ If Auto Answer mode is turned on, the received fax data is automatically printed, and you do not have to proceed
to step 8.
H
Press one of the x buttons to print the received fax.
Printing Reports
Follow the instructions below to print a fax report.
User’s Guide
Faxing
93
To Next Page
Loading...
