B
Place original.
& “Placing Originals” on page 32
C
Enter Copy mode from the Home menu.
D
Press + and - to set the number of copies.
E
Set the density.
F
Press d to enter the Copy menu.
Note:
Depending on the model, you can make copy settings in Paper and Copy Settings.
G
Select 2-Sided Copying.
H
Select the type of 2-sided copying.
Setting Description
1>1-Sided Normal copying.
2>2-Sided Each side of a double-sided original is printed onto each side of a single sheet of paper.
1>2-Sided Two single-sided originals are printed onto each side of a single sheet of paper.
2>1-Sided Each side of a double-sided original is printed onto one side of a single sheet of paper.
I
Make the appropriate settings for Document Orientation, Binding Direction, or Binding Margin.
Setting Description
Document Orientation Specifies the orientation of your originals.
Binding Direction Specifies the binding direction of your originals.
Binding Margin Specifies the binding direction of your prints.
Note:
Depending on the settings for 2-Sided Copying and Layout, these menus may not be available.
J
Press one of the x buttons to set the color mode, and then start copying.
Collate copying
With the collate copying function, multiple copies of multiple pages in a document are printed in order and collated by
copy set. Follow the instructions below to perform collated copying.
User’s Guide
Copying
39
To Next Page
Loading...
