C
Select Home Mode from the Mode list.
D
Select the Document Type setting.
E
Select the Image Type setting.
F
Click Preview.
& “Previewing and Adjusting the Scan Area” on page 67
G
Adjust the exposure, brightness, and other image quality settings.
H
Click Scan.
I
In the File Save Settings window, select the Type setting and then click OK.
Note:
If the Show this dialog box before next scan check box is cleared, Epson Scan starts scanning immediately without
displaying the File Save Settings window.
Your scanned image is saved.
User’s Guide
Scanning
63
To Next Page
Loading...
