You see a window like this:
3. Select the certificate you want to use as the Use the following CA Certificate option.
4. Select the certificate you want to use as the Use the following Client Certificate option.
5. Click Next.
You see a confirmation message.
6. Click OK.
Parent topic: Configuring IPsec/IP Filtering
Configuring SNMPv3 Protocol Settings
If your product supports the SNMPv3 protocol, you can monitor and control access to your product using
that protocol.
1. Access Web Config and select Wi-Fi/Network Settings.
2. Select Services and select Protocol.
24
To Next Page
Loading...
