You see a window like this:
3. Select the Enable SNMPv3 checkbox to enable SNMPv3 settings.
4. Select the settings you want in SNMPv3 Settings section.
5. Click Next.
You see a confirmation message.
6. Click OK.
SNMPv3 Settings
Parent topic: Using Your Product on a Secure Network
SNMPv3 Settings
You can configure these SNMPv3 settings in Web Config.
Setting Options/Description
User Name Enter a user name from 1 to 32 characters long in
ASCII
Authentication Settings
Algorithm Select and algorithm for an authentication
Password Enter a password from 8 to 32 characters long in
ASCII
Confirm Password Enter the authentication password again
Encryption Settings
25
To Next Page
Loading...
