Setting Options/Description
EAP Type Select one of these authentication methods for connections
between the product and a RADIUS server:
EAP-TLS or PEAP-TLS: You must obtain and import a CA-
signed certificate
PEAP/MSCHAPv2: You must configure a password
User ID Enter an ID for authentication on a RADIUS server
Password Enter a password for authentication of the product
Confirm Password Enter the authentication password again
Server ID Enter a server ID for authentication on a specified RADIUS
server; server ID is verified in the subject/subjectAltName field
of a server certificate sent from the RADIUS server
Anonymous Name If you selected PEAP-TLS or PEAP/MSCHAPv2 as the
Authentication Method setting, you can configure and
anonymous name instead of a user ID for phase 1 of a PEAP
authentication
Encryption Strength Select one of the following encryption strengths:
High for AES256/3DES
Middle for AES256/3DES/AES128/RC4
Parent topic: Connecting the Product to an IEEE802.1X Network
Configuring a Certificate for an IEEE802.1X Network
If your product supports IEEE802.1X, you can configure a certificate for the network using Web Config.
1. Access Web Config and select Network Security Settings.
2. Select IEEE802.1X and select Certificate.
28
To Next Page
Loading...
