33 / 56
9 • Maintenance and servicing
80116-261
2018-07
CHAPTER 9
Maintenance and servicing
Technical safety check, national regulations, trained
persons
Test intervals
ATTENTION! Adjustments, tests, modifications, maintenance and repair work may
only be performed by Erbe or persons trained by Erbe. If the work is not
performed by trained persons, Erbe accepts no liability and warranty
rights become void.
It is recommended that the technical safety check also be performed by
Erbe or persons trained by Erbe.
IMPORTANT! The safety check is a preventive measure in which there is examined
whether the equipment is safe and ready for operation. In order to per
-
form the tests the relevant specifications and regulations of the partic-
ular country must be observed.
IMPORTANT! A technical safety check must be performed every time after mainte-
nance, but at least once per year.
To Next Page
Loading...
Need help?
General
