EASY-ROTOR-CONTROL M V2.2 Instructions
___________________________________________________________________________
© Ing.-Büro E. Alba de Schmidt web : www.schmidt-alba.de
Tannenstr. 16 Page 34 of 44 email : erc@schmidt-alba.de
86836 Untermeitingen / Germany
This document is for the user only. Any publishing (printed or in electronic form) is not allowed.
Use the 3x12x4mm spacers for the LEDs to fix them in the right distance from the PCB.
Put the 19mm domes on top of the switches.
This is how it should look like:
K
K
K
K
K
K
To Next Page
Loading...