ergoline VITALITY - Information for Dismantling and Assembly; Tools and Equipment

Information for dismantling and assembly
16/58
4 Information for dismantling and assembly
4.1 Tools and equipment
The following tools are required for the dismantling / assembly
work:
 No. 2 Philips screwdriver
 Battery-powered screwdriver
 7 mm, 13 mm and 17 mm double open-ended wrench
 8 mm and 10 mm open-ended wrench
 7 mm, 8 mm, 10 mm and 13 mm socket wrench inserts
 Socket wrench extension
 4 mm Allen key (Ergoline key 84500, 83828)
 6 mm Allen key
 Ratchet wrench with PHZ-bit 2
 Torx® 10, 20, 30, 35 and Socket for spanners 10 mm
 Size 2 flat-bladed screwdriver
 5 mm flat-bladed screwdriver
 Support aid rear wall (TN 701529)
 Protection cover (10360155, 15400088)
 Lengthening piece (15720613)
 Trolley
 Protective gloves