BTS Parameter Limitations
44.4.6 External Condition Map Class 1
BTS-supported value ranges:
LAPD Q CG: 0
L/R TI: 0 - 1
L/R SWI: 0 - 1
TRA: 0 - 1
PCM SYNC: 0 - 1
EXT SYNC: 0
IWD-defined value range: 0 - 1
44.4.7 External Condition Map Class 2
BTS-supported value ranges:
RBS DOOR: 0 - 1
LAPD Q CG: 0
EXT SYNC: 0
PCM SYNC: 0 - 1
IWD-defined value range: 0 - 1
44.4.8 File Relation Indication
BTS-supported value ranges:
Other state: 0, 3
IWD-defined value range: 0 - 3
Note: There are limitations for specific combinations of current
state and other state.
44.4.9 FN Offset
FN (Frame Number) Offset must be equal for all TSs within a TRX.
Configuration of FN Offset on one TS will also reconfigure all
previously configured TSs on that TRX, provided that no TS within the
TRX is enabled.
BTS-supported value range:
FN offset: 0 - 1023 (03FF)
hex
IWD-defined value range: 0 - 1325 (052D)
hex
EN/LZT 123 2697 R5A
1998-08-13
291 (306)
© Ericsson Radio Systems AB
— All Rights Reserved —
To Next Page
Loading...
