Ericsson CME 20 R6.1 - Page 295

BTS Parameter Limitations
44.4.17 Power
BTS-supported value range:
Nominal power parameters:
900 MHz: 21 – 33
(dec)
1800 MHz: 21 – 33
(dec)
1900 MHz: 21 - 33
(dec)
IWD-defined value range: 0 - 63
(dec)
Note: Only steps by 2 is configurable (from the highest value).
44.4.18 Result Code
BTS-supported codes:
Wrong state or out of sequence: 02
File error: 03
Fault unspecified: 04
Protocol error: 06
MO not connected: 07
IWD-defined value range: 01 - 0A
44.4.19 TCH Capabilities
BTS-supported value:
Cross Combination Indicator: 127
IWD-defined value range: 0, 127
44.4.20 TF Mode
BTS-supported code:
TF mode parameter: 1 (= stand-alone)
IWD-defined value range: 00 - 02, FF
294 (306)
EN/LZT 123 2697 R5A
1998-08-13
© Ericsson Radio Systems AB
— All Rights Reserved —