EROAD Clarity Edge - Specifications

Clarity Edge Install Guide
42
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Specifications
Input Voltage
12 / 24V
Power consumption
Standby: 13.5 V @ 5.67 mA, 27 V @ 3.39 mA
Sleep: 13.5 V @ 62~124 mA, 27 V @ 32~61 mA
Between 7-12 W, depending on Camera/SD/SIM/sensor load.
Camera resolution
Front-facing: 1080p@25fps; Driver-facing: 720p@20fps
Field of view
Front horizontal: 123°
Front vertical: 65°
Driver: 140°
Audio
Built-in mic (default OFF)
Speaker power: 3W, with adjustable volume
Status lights
Power: Green On/ Off
Alarm: Triple-Flash Red (Alarm)/ Off
GPS: Red (Abnormal)/ Red flash (Poor positioning)/Off (normal)
Network: Red (Abnormal/ Off (Normal)
Wi-Fi: Green (AP mode)/ Red (Abnormal)/ Off (Normal)
Camera: Red (Fault, Privacy mode fail)/ Off (Normal)
Storage
MicroSD card×2 (SDXC 256GB), Class 10 or above
Recording time
Dependent on MicroSD card size and additional cameras (eg. Fatigue
camera)
Sensors
6-axis IMU for acceleration/rotation
ambient light for day/night switching
Ports
USB Mini, MP2 SIM Card x2, RS232, I/O, CAN
GPS
GPS L1, GALILEO, GLONASS, SBAS: WAAS, EGNOS, MSAS, GAGAN
Cellular networks
USA: AT&T, T-Mobile, Cincinnati Bell, Immix, CommNet Wireless
CAN: Bell Mobility, Telus, Videotron, SaskTel
MEX: Telcel, IUSACell
AUS: Telstra
NZL: Vodafone GDSP